大型柔性起竖臂的有限元建模与分析

针对使用中的振动问题，基于ANSYS软件平台建立某大型柔性起竖臂合理的有限元模型，获得其固有振动特性、刚度和强度等设计数据。分析表明，使用中出现的振动现象是由于外载荷频率接近起竖臂一阶固有频率所致，而起竖臂刚度和强度设计整体合理，但存在局部应力集中和强度设计偏于保守的问题。     

Rose-tinted lenses: how American functionalist strategy inhibits our appreciation of complex conflicts

Strategists and military professionals have previously questioned many of the methodological (theoretical underpinnings, the principles, and rules applied by the discipline) decisions associated with American military strategy, but the direction this essay takes is above and beyond the common methodological rivalries in how we pursue strategic desired future states. To get beyond methodological disputes entirely, we must consider thinking about our thinking as an organization on American strategy. Thus, this article hovers between philosophies, organizational theory, as well as our usually unquestioned belief in something called “strategy”. Questioning things about our basic understanding of the world tends to trigger strong organizational defense mechanisms, for good reason. Critical reflection at deep levels puts our worldview, and our role within it at stake. Nonetheless, as strategic disappointment emerges over multiple complex conflict developments, even the most cherished and guarded choices on how the world ought to work are ripe for critical inquiry. This essay examines the limited single strategic paradigm of the US defense industry and how the latest American National Security Strategy and Army Future Operating Concept (Win in a Complex World through 2030) presents a flawed strategic position. This essay presents valid alternative strategies that operate within different paradigmatic constructs.     

近地一次环月两次交会的载人登月任务规划

针对近地一次环月两次交会的载人登月任务飞行阶段多、周期长、约束复杂,导致各阶段飞行窗口与轨道衔接匹配复杂的难题,提出分层分解、正逆向结合的全任务标称飞行窗口与轨道衔接设计策略。介绍近地一次环月两次交会的载人登月任务飞行模式特点和应用前景,假定任务基本需求与工程约束,仿真验证所提方法的有效性,可以快速规划出近地一次环月两次交会的载人登月任务飞行轨道与窗口。     

基于多Agent仿真的装备保障体系供应保障系统设计与实现?

针对部队装备保障运行的实际情况，采用多Agent仿真的方法，基于Kraljic模型将装甲装备器材分为重要器材、关键器材、一般器材和稀缺器材，并以此为基础构建了装备保障体系供应保障系统。分析了系统的整体结构以及系统中器材仓库的外部接口和内部器材请领流程，并以某集团军各级器材仓库为研究对象进行了仿真实例分析。实践证明，采用多Agent仿真的方法研究装备保障体系供应保障活动具备可行性和有效性，有利于宏观把握部队装备保障的运行规律，提高部队装备保障能力。     

飞行器有源对消隐身技术

隐身技术已经成为现代高性能飞行器设计的重要支撑,是先进战机的基本要求。现行的隐身设计方法主要包括气动外形优化以及隐身材料涂覆。随着雷达探测能力的不断提升,尤其在米波雷达探测背景下,外形优化与隐身涂层变得不再有效,有源隐身技术被重新予以重视并有望成为新的隐身技术突破点。本文着重分析了有源对消技术的基本概念、技术现状以及相应的关键技术,对该技术体制的优势和特点进行了归纳和总结。     

飞机再次出动保障活动设计方法

飞机再次出动保障活动所需时间长短对提升飞机的作战效能至关重要,针对当前在飞机保障资源有限约束条件下,再次出动保障活动工期最短难以实现的难题,提出了基于分支切割法的再次出动保障活动时间优化方法。该方法以飞机再次出动保障活动所需时间最短为目标,以有限的保障人员和保障作业间逻辑关系为约束条件,可计算出时间最短的飞机再次出动保障活动具体流程,并用VB6.0编制成计算机程序,开发了飞机再次出动保障活动分析系统。最后,对某型飞机真实保障活动进行了实例分析,结果表明,使用该方法计算得到的结果准确、可靠,与实际保障情况相符,可为飞机再次出动保障与决策提供指导,提升保障活动的自动化水平,具有很好的工程应用价值。     

Spaghetti: systems thinking and the US Army

In the mid-2000s, the United States Army was embroiled in counterinsurgency missions in Iraq and Afghanistan that required deeper understanding of local social systems. The Army turned to systems thinking and design thinking to model and understand the world, define problems, and develop approaches to strategic and operational challenges. However, the Army’s approach as expressed in publications and doctrine encourages the development of complicated, unsupported, and unfalsifiable hypotheses. The risk is that the Army will act on incorrect assumptions and develop plans that are fragile.     

基于仿真推演的导弹作战实验框架分析与设计

针对导弹武器论证设计高成本、高复杂度的问题，本文梳理了导弹作战实验设计服务的多种功能需求，阐述了导弹作战实验设计的数理方法；为构建具有较好柔性的导弹作战实验仿真框架，针对导弹系统多个性能指标，辨析了各类导弹作战实验仿真变量；针对作战实验中的环境和装备特性，梳理了导弹作战实验模型体系，提出了仿真新模型开发框架；结合导弹作战实验案例，构建了实验设计优化方法，提出了作战实验检验设计方案；从运行实验出发，阐述了设定作战想定、建立控制机制、开展结果分析等仿真环节的具体设计。通过这些工作，形成了一种支撑导弹作战实验的柔性仿真框架，为进一步开展基于仿真推演的导弹作战实验提供参考。     

Quality control chart design under Jidoka

We consider design of control charts in the presence of machine stoppages that are exogenously imposed (as under jidoka practices). Each stoppage creates an opportunity for inspection/repair at reduced cost. We first model a single machine facing opportunities arriving according to a Poisson process, develop the expressions for its operating characteristics and construct the optimization problem for economic design of a control chart. We, then, consider the multiple machine setting where individual machine stoppages may create inspection/repair opportunities for other machines. We develop exact expressions for the cases when all machines are either opportunity‐takers or not. On the basis of an approximation for the all‐taker case, we then propose an approximate model for the mixed case. In a numerical study, we examine the opportunity taking behavior of machines in both single and multiple machine settings and the impact of such practices on the design of an X – Q C chart. Our findings indicate that incorporating inspection/repair opportunities into QC chart design may provide considerable cost savings. © 2009 Wiley Periodicals, Inc. Naval Research Logistics 2009     

Optimizing fishbone aisles for dual‐command operations in a warehouse

Unit‐load warehouses store and retrieve unit‐loads, typically pallets. When storage and retrieval operations are not coordinated, travel is from a pickup and deposit (P&D) point to a pallet location and back again. In some facilities, workers interleave storage and retrieval operations to form a dual‐command cycle. Two new aisle designs proposed by Gue and Meller (“Improving the unit‐load warehouse.” In Progress in Material Handling Research: 2006. Material Handling Industry of America, Charlotte, NC, 2006) use diagonal aisles to reduce the travel distance to a single pallet location by approximately 10 and 20[percnt] for the two designs, respectively. We develop analytical expressions for travel between pallet locations for one of these—the fishbone design. We then compare fishbone warehouses that have been optimized for dual‐command to traditional warehouses that have been optimized in the same manner, and show that an optimal fishbone design reduces dual‐command travel by 10–15%. © 2009 Wiley Periodicals, Inc. Naval Research Logistics 54: 389–403, 2009